Importer un composant ou un modèle 3D
Cette commande ouvre la fenêtre de dialogue d'ouverture de fichier, permettant de sélectionner et d'ouvrir des fichiers Aspireexistants (extension CRV3D) et des fichiers 3D tiers importables. Si vous sélectionnez un format de modèle 3D tiers, le formulaire Modèle d'orientation s'ouvre (voir ci-dessous) pour vous permettre de manipuler le modèle 3D avant qu'il ne soit converti en composant.
CRV3D | 3D data from files previously created and saved in Aspire will be opened and a new single Component Created (from all the visible 3D Components in the file when it was saved). The new Component will have the same name as the file. This will be imported at the size and position the part was saved in the original file. |
3DCLIP | 3D Clipart files are exported from Aspire. This format maintains the component structure of clipart pieces at the time of saving, so will import all the components comprising the clipart piece. This will be imported at the size and position the part was saved in the original file. |
V3M | V3M is a proprietary file format developed by Vectric for Vector Art 3D and Design and Make. Files in this format can be purchased from www.vectorart3d.com and www.designandmake.com and when imported into Aspire will create a new Component with the same name as the file. This will be imported at the size and position the part was saved in the original file. |
STL | This is a standard format for complex 3D models, based on a triangular mesh. STL files can be exported from many 3D design software programs such as Rhino. These models can be completely 3 dimensional (i.e. have a front, back, etc.), this means that when this type of file is opened that it must first be sized and oriented before a Component can be created (Aspire only represents base-relief so cannot work with a completely 3D object). Once the file becomes a Component it will have the same name as the original STL file. This file type will need to be imported using the Orientate 3D ModelAspire. |
DXF | 3D DXF files from AutoCAD and many other CAD orientated modeling packages, these must be 3D meshes and not just wireframe data of the models vertices. This file type will need to be imported using the Orientate 3D ModelAspire. |
3DS | A native format from 3D Studio Max and many other animation orientated modeling packages. This file type will need to be imported using the Orientate 3D ModelAspire. |
OBJ | A native format from Wavefront and many other animation orientated modeling packages. This file type will need to be imported using the Orientate 3D ModelAspire. |
SKP | A native format from the SketchUp modeling package. This file type will need to be imported using the Orientate 3D ModelAspire. |
Note
If you wish to read data from a 3D digitizer or scanning device then STL is typically the best format that should be used to import the data. Many software packages that work with a scanner offer an STL export option, if not then a third party software program may be required to convert the data to an STL model.
Importation d'un modèle 3D (STL, DXF, 3DS, OBJ, ...)
Lorsque l'un de ces formats est choisi pour l'importation de fichiers 3D, le modèle importé doit être orienté et mis à l'échelle avant de pouvoir devenir un composant. Une fenêtre d'importation spéciale s'ouvre et un ensemble d'outils d'orientation et de mise à l'échelle est activé. Selon le type de travail, la fenêtre d'importation sera différente :